Click To Call(656) 254-3514Click To Get A Free Estimate
Red and tan brick pavers laid in a herringbone pattern on a sealed front entry in Lutz with a clay planter

Protect the color of your brick pavers

Brick Paver Sealing in Lutz, FL

Call (656) 254-3514 and a local contractor will test your Lutz brick pavers and quote the sealing.

  • Brings out deeper paver color
  • Fresh joint sand helps lock pavers in place
  • Gives weeds less room to grow
  • Makes the surface easier to keep clean
  • Free estimate, no obligation

Request a Free Estimate

Free, no obligation.

Step 1 of 2

Where are your pavers?

Please choose one.

Free EstimateNo obligation
Fast ReplyWithin 1 business day, usually much sooner
Typical Local Price$1.25 to $2.50 a sq ft to clean, sand and seal
Call Now(656) 254-3514

Is brick paver sealing available at my Lutz home?

Brick paver sealing in Lutz, FL is available across this service area, and a local contractor answers within 1 business day, usually sooner. The look at your Lutz pavers is free. To begin, call (656) 254-3514.

Brick asks for more care than a plain concrete paver, because the wrong sealer can cloud it or change the shade. A short test on a hidden spot answers most of that, and the right product leaves the red and tan tones looking richer. If you are unsure whether the pavers are clay or concrete, say so, because the contractor can work that out on site. Share whatever paperwork or memory you have about your Lutz pavers when you send a free estimate request.

Call (656) 254-3514

Clay brick or concrete brick: does it change the sealer?

It does, and it is the first question to settle. Rising Tide says clay pavers are highly resistant to absorbing stains and have color fired all the way through, while sealers add a layer of protection to concrete units. Rusty's Pressure Wash and Seal says brick often needs products formulated for clay. For help identifying yours, call (656) 254-3514.

Clay brick in Lutz

Fired through the body. The Brick Industry Association says most clay pavers exceed 10,000 psi and sealing is optional.

Concrete brick look in Lutz

Takes sealer readily. Acrylic, silane, siloxane and urethane families all apply, depending on the look wanted.

Older Lutz pavers of unknown type

Builder paperwork or HOA records often say which. A test patch settles what they do not.

Mixed areas at one Lutz home

A home can have clay on the entry and concrete on the drive. Each gets its own product and its own test.

Hand placing a small test patch of sealer on a red brick paver while a homeowner watches
Why choose us

Why test one brick before sealing the rest?

Rising Tide says products applied directly to clay should be tested on a small area first, because some have been known to haze, stain or discolor certain pavers. The test takes a day. A hidden corner, a step edge or a spare paver is enough, and it shows the real finish before any large area of your Lutz home is touched. Ask for the test when you send a free estimate request.

Cloudiness has causes beyond the sealer itself. Rising Tide lists joints and surfaces that were not dry, sources of efflorescence, a base that drains poorly and sealer applied too thick. Cloudy sealer generally must be stripped, so prevention is cheaper. Call (656) 254-3514 if a patch of yours already looks milky.

Which finish looks right on brick: matte, satin or wet look?

Unilock says brick pavers often need a matte or low-gloss sealer, and that wet-look sealers deepen color and sheen while natural matte finishes are the alternative. Rising Tide reports installers disagree about wet look on clay, so seeing a sample on your own brick matters more than a general rule. Pick the Lutz finish after that sample, then send a free estimate request.

Rusty's says wet look is the most requested finish across the bay area, with natural look giving little to no sheen. Palm and Paver notes a second coat is often needed on porous pavers or for a deeper wet look. Brick that drinks sealer may take more product, and the estimate should show that. Questions on the finish? Call (656) 254-3514.

What does a sealer do for brick pavers?

On brick, the job is part cosmetic and part practical. On a Lutz home, a coat deepens the red tones, makes dust and algae rinse off sooner and holds the sand in the joints. Paver Rescue says sealer stabilizes joint sand, which reduces weed growth and erosion. The coat is not a structural fix, and Unilock says sealing will not cure poor drainage or a weak base. To weigh the benefit for yours, call (656) 254-3514.

Shaded brick turns green first. Marks Painting says Lutz homes near lakes and wooded lots see shade that keeps pavers damp longer, and the same page lists humidity and afternoon downpours. A sealed surface sheds that water better. Show the damp corners when you send a free estimate request.

Does Lutz weather change how brick should be cleaned and dried?

Yes, mostly for timing. Wikipedia's bay area climate article puts average humidity at 74.1 percent and says nearly two thirds of the 49.48 inches of yearly rain falls from June through September. Unilock asks for 24 to 48 hours of clear weather around sealing. Brick that is still damp inside can trap haze under the coat. For a day the weather backs up, call (656) 254-3514.

Washing a Lutz paver is gentler on brick than a blast. Unilock warns that too much pressure can damage the surface or blow out joint sand, and it says to skip wire brushes, which can leave metal particles that rust. Ask about pressure and tools when you send a free estimate request.

Pricing

What does brick paver sealing cost in Lutz?

No page read for this site gives a brick-only rate, so the table is built from the published pieces: the bay area range for cleaning and sealing, the minimums and the Lutz project range. Brick may add a test patch or a special product, which the contractor should price in writing. For your figure, send a free estimate request.

Piece of the jobPublished sourceFigure
Clean, sand and seal, per sq ftRusty's Pressure Wash and Seal$1.25 to $2.50
Clean and seal, per sq ftWashy Bear (Hillsborough County city)$1.50 to $2.50
Clean, re-sand and seal, 1,000 sq ft minimumSandbar Soft Washabout $1.85 per sq ft
Minimum charge many companies holdRusty's Pressure Wash and Seal$500 to $1,000
Whole Lutz paver sealing projectsPalm and Paver (Lutz)$350 to $1,500
Sealer material only, water or solvent, per gallonUnilock$80 to $150

These are published figures, not quotes from this site. Brick may need clay-formulated products, a test patch or a second coat, so ask the contractor to list each. A walkway under 300 square feet is likely to meet the minimum, not the per foot math.

Get a Free Estimate

How long does sealed brick take to cure?

Short jobs usually finish in one day. Palm and Paver says most residential jobs in Lutz take one day and larger or heavily soiled ones two. Rusty's says foot traffic is fine at about 24 hours, and Unilock wants up to 48 hours of dry weather. Chairs and planters should wait for that second day. To book around the forecast, call (656) 254-3514.

Wet brick is the common delay. Unilock says pavers dry in a few hours in warm sun and about 24 hours in cool shade, and polymeric sand needs 24 hours before sealing. A shaded brick entry takes the long end. If rain spoils the plan, the contractor reschedules. To ask how, send a free estimate request.

How often should brick pavers be sealed again?

For concrete pavers, Unilock says three to five years. Rising Tide notes that shaded, lightly used areas can go longer while sunny, busy ones come sooner. For true clay brick, sealing is optional, so the schedule is your preference, not a requirement. A fading coat shows as a patchy sheen or water that soaks in. Show yours when you send a free estimate request.

Unilock says to test the compatibility of old and new sealer before recoating, and Rising Tide says urethane cannot be refreshed simply by recoating. That makes it worth knowing what is on the brick now. Share any paperwork you have, or call (656) 254-3514.

How it works

What does the process look like for a brick patio or walk?

The Lutz steps follow the same order as other pavers, with a test patch added at the start. To schedule them, call (656) 254-3514.

1. Identify and test

Clay or concrete is confirmed at your Lutz home, and a hidden spot gets a trial coat.

2. Gentle wash

Algae and dirt come off at moderate pressure so the joint sand stays.

3. Dry and refill

Pavers dry fully. Polymeric sand goes in and sets for 24 hours.

4. Seal in thin passes

A matte or low-gloss product goes on in even passes, sprayed or rolled.

5. Walk the job

At the Lutz walk-through, the contractor names the hours to stay off and when to expect full cure.

Swept brick paver terrace with moss free joints under a screen porch roof
Photos

What can sealed brick pavers look like around Lutz?

Freshly sealed paver driveway on a brick paver entry in Lutz
Sealed paver pool deck on a brick paver entry in Lutz
Sealed paver patio behind the home on a brick paver entry in Lutz
Sealed paver walkway to a front door on a brick paver entry in Lutz
Close view of freshly sealed pavers on a brick paver entry in Lutz
Paver area with one cleaned half beside a dirty half on a brick paver entry in Lutz
Contractor cleaning pavers on a brick paver entry in Lutz
Contractor sealing or sanding pavers on a brick paver entry in Lutz
Questions

Questions Lutz owners ask about brick paver sealing

What are the downsides of sealing pavers?

Upkeep is the main one, since a coat wears and needs renewing. On brick there is a second risk: Rising Tide says products applied straight to clay should be tested on a small area first, because some have hazed, stained or discolored certain pavers. A test patch removes most of that worry for a Lutz home.

Do clay brick pavers need to be sealed at all?

Not always. Rising Tide, quoting the Brick Industry Association, says clay pavers resist salt and freezing more consistently and do not require sealers the way concrete units do. Many Lutz owners seal anyway for a deeper color or an easier rinse, which is a choice rather than a rule.

Can I seal my pavers myself?

Some people do. On brick the stakes are higher, because Rusty's Pressure Wash and Seal says brick can absorb sealers differently than concrete and often needs a product made for clay. A wrong pick can leave a cloudy patch that has to be stripped, so a contractor with a test plan is the safer route in Lutz.

How often should I seal pavers in Florida?

Unilock and Rusty's say every three to five years for pavers in general, and Washy Bear says two to three on driveways and decks. For brick the interval is a choice, since clay does not need a coat to survive. A sealed brick patio in shade can go longer than a sunny drive.

How much does it cost to seal brick pavers in Lutz?

No page read prices brick on its own. The published bay area figure for cleaning and sealing pavers is $1.25 to $2.50 a square foot, and a Lutz company lists projects from $350 to $1,500. Brick in Lutz may need a special sealer and a test patch, so the estimate should say so.

What is the average lifespan of a paver driveway?

No page read for this site gives a number, and it depends on the base and the pavers more than the sealer. Rising Tide, quoting the Brick Industry Association, says most clay pavers have strengths exceeding 10,000 psi. Sealer is the part that has a schedule, usually every few years.

Will sealer make my brick pavers look shiny?

It can. Rising Tide says acrylics enhance color and add gloss, while silane and siloxane sealers leave a flat, no-gloss finish. Unilock says brick pavers often need a matte or low-gloss sealer. Ask to see a sample of the finish on a spare brick or a hidden corner.

How do I tell if my pavers are brick or concrete?

Builder paperwork or HOA records usually say, according to Rising Tide, and a contractor can often tell on sight or with a small test. Rising Tide says clay color is fired through the whole unit, so surface wear does not show a different shade.

Why do my brick pavers show a white haze?

Often efflorescence, which also shows on Lutz patios. Unilock says calcium salts rise as water wets and dries the paver, and that it can fade in two to three months or take up to a year. It must be gone before sealing. A cloudy older coat can look similar, so a contractor checks which one it is.

Curious what sealer your Lutz brick pavers would take?

Ask for a free look. A local contractor replies within 1 business day, often within hours.

Call (656) 254-3514

Free, no obligation