Click To Call(656) 254-3514Click To Get A Free Estimate
Sealed brick paver driveway at a home in Town 'n' Country

Paver sealing for Town 'n' Country homes

Paver Sealing in Town 'n' Country, FL

Faded driveway pavers at a Town 'n' Country home get a free paver sealing estimate when you call (656) 254-3514.

  • Brings out deeper paver color
  • Fresh joint sand helps lock pavers in place
  • Gives weeds less room to grow
  • Makes the surface easier to keep clean
  • Free estimate, no obligation

Request a Free Estimate

Free, no obligation.

Step 1 of 2

Where are your pavers?

Please choose one.

Free EstimateNo obligation
Fast ReplyWithin 1 business day, usually much sooner
Typical Local Price$1.25 to $2.50 a sq ft to clean, sand and seal
Call Now(656) 254-3514
Paver sealing

Fast, careful paver sealing in Town 'n' Country

Paver sealing is available in Town 'n' Country, from the older streets near Hillsborough Avenue to the neighborhoods by Rocky Creek and Sweetwater Creek. A contractor handles the wash, the sand and the sealer on drives, decks and walks, and the visit is free. Send send a free estimate request and a reply arrives within 1 business day, often much sooner than that.

Here is the common sight. The house is solid and the street is quiet, but the paver driveway looks like it belongs to a house ten years older. A wash, fresh sand and a new coat take care of that gap. If you would like to talk it through first, call (656) 254-3514 and say what you are seeing.

Call (656) 254-3514

Family relaxing by a sealed paver pool deck near Town 'n' Country
Why hire local

Why hire a local paver sealing contractor in Town 'n' Country?

With nearly 8,000 homes built from 1958 to 1978 and more added since, Town 'n' Country has pavers of every age. A contractor who works here starts by asking how old your house and your surfaces are. To start that talk, call (656) 254-3514.

Walk-around at no charge

The contractor tours your drive, deck and walks and names a price. Hiring comes later, if at all.

A figure worth knowing

Bay companies list $1.25 to $2.50 a square foot. Check any Town 'n' Country bid against it.

Old house, newer pavers

Many owners added pavers during a remodel. The contractor works out what you have before picking a product.

Your decisions

Pick the sheen and the day. No one makes those choices for you.

Get Your Free Estimate in Town 'n' Country

Tell us about your pavers in Town 'n' Country.

Call (656) 254-3514

Free, no obligation

Paver joint sand detail on a walkway near Town 'n' Country
Common problems

What paver problems show up most in Town 'n' Country?

Pavers added to a house that is more than sixty years old

LaMonte-Shimberg built nearly 8,000 homes and townhouses in Town 'n' Country between 1958 and 1978. Many owners have since added paver driveways, patios and pool decks to those houses. The pavers may be newer than the house, but the sealer history is often unknown. Water-based sealer cannot go over solvent-based sealer, so the old coat decides the next one. If you bought the house from the first owner or a later one, any paperwork from the pavers helps. A product name on an old invoice can save time on the day of the job. The plan of the original builders was simple: a lot of similar houses on similar lots. That means a street can hold a dozen homes of the same age with a dozen different paver histories. If a neighbor's drive looks fresh, ask what was done and when.

Joint sand washed out by creek-country rain

Rocky Creek and Sweetwater Creek run through the area, and the ground is the sand Florida is known for. Myakka, Florida's state soil, is sand, and in natural conditions groundwater climbs close to the surface for months at a stretch. Add summer storms and the joints lose sand quickly. Open joints let in soil and weeds, so sand goes back in before every coat. A paver that wobbles underfoot is often a sign the joint sand is already low. That is cheaper to fix now than after another rainy season. Drainage near the creeks can be slow after a storm, and the joint sand loses out first. A paver that shifts underfoot is the sign. Where a drive meets the street, sand also washes out toward the curb.

Rust streaks from sprinklers

A University of Florida piece on well water notes high iron levels across much of the state. Orange streaks show where it lands on building sides and hard surfaces. If your yard runs sprinklers from a well, check pavers near the heads. The rust has to come out before sealing, because sealer would lock it in place. Moving the heads so they spray grass instead of pavers helps keep new marks from forming after the job is done. Orange streaks tend to repeat in the same place, because the sprinkler timer repeats. A stain that shows up as a fan or a line is almost always irrigation. The fix has two parts: treat the stain, then redirect the spray.

Green growth under old shade trees

Many blocks built in the 1960s and 1970s now have mature trees. A landscape guide says moss and algae on pavers point to heavy, lasting shade. A driveway under a large oak or a walkway beside a fence can stay wet for hours after rain. The green has to be washed away before sealer goes on. Green film also turns slick when wet, which matters near front steps and a pool edge. Early washing keeps the work simple. Shade on blocks built in the 1960s has had decades to fill in. A walk beside a fence or garage can sit in shade for most of the day. Those strips need a closer look when the contractor decides how long to let the surface dry.

Faded pool decks and lanai floors

Town 'n' Country has about 35,174 housing units, and many have pools. Sun, splash and sunscreen dull a pool deck faster than a front walk. A fresh coat brings back the color. For a deck, ask for a finish that stays safe for bare, wet feet. Ask the contractor to explain which finish gives grip when wet before you choose. It is a small question with a real payoff. Deck pavers near a pool also hold sunscreen and oils, which a wash has to remove. A finish that stays safe when wet matters most near the pool edge and the steps. Say how the deck is used so the finish is chosen to fit.

Neighborhoods

Does the age of my Town 'n' Country street change the sealing plan?

Yes, because the oldest streets are more than sixty years old and the newest are recent. The original Town 'n' Country Park subdivision started in 1958 on a 525-acre dairy farm near Hillsborough Avenue and Memorial. Pavers on those streets were mostly added later, by owners who updated their homes. When you send a free estimate request, tell the contractor roughly when your house was built.

Named areas inside Town 'n' Country include Bay Crest Park, Countryway, Rocky Creek and Sweetwater Creek. Lots near the creeks can stay damp, while lots near a main road take more dust and tire wear. The city of Oldsmar lies just to the west, and Westchase, Citrus Park and Carrollwood sit to the north. Call (656) 254-3514 and tell the contractor which part of town you are in.

The northwest corner of Tampa International Airport sits inside Town 'n' Country, which is a good reminder of how big and varied the area is. A driveway near a busy road collects grime differently than one on a quiet cul-de-sac. The contractor looks at each on its own terms. To set up a free visit, send a free estimate request.

Pricing

What does paver sealing cost in Town 'n' Country?

Published prices around Tampa Bay for wash, sand and seal span $1.25 to $2.50 a square foot. Where your Town 'n' Country job lands depends on green growth, rust, old sealer and how much sand is missing. A long drive plus a pool deck adds up in square feet even at one rate. For a price on the pavers at your house, use send a free estimate request.

Reaching the work matters. A flat, open driveway moves faster than a patio behind a side gate. Resets and stained spots add time. Call (656) 254-3514 and the contractor will say which of these apply, at no charge.

Paved areaTypical exampleClean, sand and seal
300 sq ftSmall patio or walkway$375 to $750
600 sq ftTwo car driveway$750 to $1,500
1,000 sq ftLarge driveway or pool deck$1,250 to $2,500
1,500 sq ftDriveway plus pool deck$1,875 to $3,750

Math based on the $1.25 to $2.50 per square foot that Tampa Bay paver companies publish. Your contractor sets the actual price after seeing the surface. Repairs, leveling and stripping failed sealer are usually extra.

Get a Free Estimate

Contractors sealing a paver driveway at a home in Town 'n' Country
How it works

How does a paver sealing job work in Town 'n' Country?

Size up the house and the pavers

The contractor checks your Town 'n' Country pavers for low spots, loose stones and any old coat. On a house built decades ago, the pavers often came with a remodel and nobody noted the product. A water-based coat will not bond to solvent-based sealer, so the type is identified first. Sunken pavers are reset before anything else, since sealing over a dip locks the dip in. Note the square feet of each surface so the quote is easy to compare with others.

Clean the stones and lift stains

Washing takes off green film, tire marks and grime. Irrigation rust is treated at this stage, since sealer would trap it. Rinse water stays clear of plants, screens and siding. Whatever is left behind shows through the finished coat, so this step sets the result. Edges near plants get a lighter touch, and low fixtures near the pavers can be covered when needed.

Pack the joints

Rinsing carries the joint sand away, which is why it gets replaced before sealing. On sandy ground near the creeks, joints drain fast, and open ones let in weeds and soil. Sand is swept in until the joints are topped up, then the faces are brushed clear. Packed joints keep neighboring pavers from shifting. Extra sand is swept up so it does not coat the faces, and the contractor matches the sand to the joint width.

Wait out the damp

Afternoon storms run from May to early October, and a shaded side yard holds moisture longer than a sunny drive. Checking the joints and not only the paver faces tells the contractor what moisture remains. Patience here beats a cloudy coat. Dips and sprinkler spots are rechecked before work resumes. A hand test of the joints is a quick check that tells the contractor whether to wait.

Coat the surface and set the clock

Sealer is rolled on last, in the sheen you selected. Company quotes allow two to five years before recoating, and one outfit around the bay puts drives and decks nearer two to three. Walking is safe well before driving. You get a time for each, plus the product name for your records. Cars, bikes and chairs stay off until told otherwise, so pick a day when the driveway can sit idle.

Services

Complete paver services in Town 'n' Country

Picture the job as a checklist. Rinse the surface, fill the joints, let it dry, then seal. The seal comes last so no dirt is sealed in. To ask how long each item takes on your lot, call (656) 254-3514.

Different corners of the lot call for different care. The drive takes tires and heat, the pool deck takes splash and sunscreen, and the side walk takes sprinkler spray and shade. Tell the contractor which ones you want when you send a free estimate request.

The first question is what coat is already down, since water-based and solvent-based products do not stack. After that, you choose between a quiet matte and a deeper wet look. Wet look shows scuffs earlier on a busy drive. Call (656) 254-3514 to compare the two for your Town 'n' Country home.

Weather runs the calendar. Storms come most afternoons from May to early October, so a summer date can move. Local companies often favor October through the early spring months. For a date that suits your week, send a free estimate request.

Questions to ask before you hire

  • Will you tell me how many days to keep cars off the driveway and chairs off the patio?
  • How long before I should expect to reseal in Florida sun and summer rain?
  • Does the quote include the pressure wash, new joint sand and any sunken pavers I point out?
  • Can my HOA see the sealer name and finish before you start?
  • Will the sealer change the color of my pavers, and can I see a sample patch first?
  • Is the work covered in writing if the sealer peels or turns cloudy?
  • Will you get the rust stains from my irrigation water out before sealing?
Photos

What do sealed pavers look like around Town 'n' Country?

Freshly sealed paver driveway near Town 'n' Country
Sealed paver pool deck near Town 'n' Country
Sealed paver patio behind the home near Town 'n' Country
Sealed paver walkway to a front door near Town 'n' Country
Close view of freshly sealed pavers near Town 'n' Country
Paver area with one cleaned half beside a dirty half near Town 'n' Country
Contractor cleaning pavers near Town 'n' Country
Contractor sealing or sanding pavers near Town 'n' Country
Contractor talking through a paver sealing estimate with a homeowner in Town 'n' Country
Local

Why local matters in Town 'n' Country

A contractor who works Town 'n' Country knows how large and mixed it is. A 1958 house can sit near one built last year, and the pavers have as many ages as the houses. That is why the sealer history comes up first. To find a contractor active in west Hillsborough County, call (656) 254-3514.

Local work also means knowing the ground. Creek-country sand drains quickly, so joints lose their fill after a wet summer. A contractor from here brings extra sand and plans to refill. Use send a free estimate request and ask how joint sand is replaced near the creeks.

Local roots

How did Town 'n' Country grow into a big suburb?

It grew from farmland. Before the 1950s the area was mostly natural land and cattle farms, and in 1958 the LaMonte-Shimberg Corporation bought a dairy farm to build Town 'n' Country Park. Homes were moderately priced, starting at $9,150, and buyers could put $200 down on a 40-year mortgage. For a house from that first building run, call (656) 254-3514 and say so.

By the end of the building run in 1978 the area stretched more than three miles from Memorial Highway north past Waters Avenue. Today Bay Crest Park, Countryway, Rocky Creek and Sweetwater Creek are all part of it. Oldsmar lies just west across the county line. Wherever you live in Town 'n' Country, send a free estimate request and describe your pavers.

Questions

Frequently Asked Questions

What should I clean pavers with before sealing in Town 'n' Country?

A contractor picks washing equipment and cleaners to suit your pavers, then replaces the joint sand once the surface is clean. Rust and green film are treated first. Ask which cleaner is planned and how stains get treated. A clean, bare surface lets the sealer bond and dry evenly. Larger lots can hold more than one paver area, so the quote may list each one. In an area that spans more than 22 square miles of land, a cleaner that suits one street may not suit the next, so the test spot matters.

Is it better to spray or roll paver sealer?

Spraying first and rolling second is a common pair, because rolling levels the coat. Which method is used depends on the sealer and on the paver. The roller also works product down into the joints. Ask the contractor what is planned for your surface. A shaded fence line often shows the most green, so point it out. Because buyers in 1958 could start with only $200 down, many early owners later upgraded drives and patios on their own schedule, and the results vary.

How much does it cost to get pavers sealed in Town 'n' Country?

Published figures from Tampa Bay companies put a full wash, sand and seal at $1.25 to $2.50 a square foot. Green growth, rust and missing sand push a job around inside that range. The free visit turns that range into a firm number for your lot. You are not obliged to hire anyone, and the price lists each step covered. Pool decks are often the first area owners ask about. At the creek-side lots near Rocky Creek and Sweetwater Creek, expect the quote to include a closer look at drainage.

How many years does paver sealer last in Florida?

Many quotes allow between two and five years before the next coat. One company in the bay area puts most drives and decks at two to three years. A shaded or wet area may need it sooner. A quick water test after a shower shows when the coat is thinning. A photo of an old label helps the contractor match the existing coat. Town 'n' Country borders the city of Tampa and Oldsmar, so crews that serve those areas may also quote your street.

When does paver sealing fail?

Coats wear thin and need renewing, and a wet look shows scuffs before matte does. Sealer also needs dry pavers, so rain can move a Town 'n' Country date. Those trade-offs are worth a few minutes of thought before you decide. On a home that is decades old, the pavers may be newer than the house itself. With about 35,000 housing units in the area, you can ask neighbors who had the work done and compare notes.

Is it good to seal pavers in Town 'n' Country?

Usually it is. Sealing slows sand loss from the joints and cuts down on weeds and ants. Sunken pavers are not repaired by sealer, so they are reset before it goes on. A shady side yard is where the longest wait usually happens. Some pool owners choose matte for the deck and a deeper look for the front drive.

Can new sealer go over old sealer on my pavers?

Not always. If solvent-based sealer is down, a water-based coat cannot be added over it. The contractor identifies the old product first, which can be tricky when a past owner added the pavers. An old receipt or a can label in the garage can answer the question quickly. If creek moisture is a factor on your lot, mention it at the first visit. Shade that has grown in over sixty years can make a north-facing walk the slowest surface to dry.

Can I seal pavers during the rainy season?

You can, though the date may move. Sealer needs dry pavers and dry joints, and storms run most afternoons from May to early October. Local companies often favor October through the early spring months. Patience on the schedule often means a clearer, steadier finish. Many owners prefer a morning start so the day has time to finish. Bay Crest Park and Countryway are named areas here, so mention yours when you ask for a visit.

Will sealing take rust stains off my Town 'n' Country pavers?

No. Rust from irrigation has to be treated before sealing, because sealer would trap it. Well water in much of Florida carries a lot of iron. Point out stains at the first visit. If the house is a rental, check with the owner before choosing a sheen or a date.

How long before I can drive on a freshly sealed driveway?

People can usually walk on it before cars can drive on it, though sealer and weather set the timing. Ask the contractor for a day and time before the job starts, and keep cars off until then. Plan on keeping chairs, grills and bikes off as well. A little planning around the weekly trash day and the school run keeps the driveway free when it is needed.

Does a wet look or matte finish suit a Town 'n' Country driveway?

Matte hides scuffs better and keeps a natural look. Wet look gives deeper color, though scuffs appear earlier. For a busy driveway many owners lean toward matte. A small test patch lets you see the result first.

Can sealing fix sunken pavers on my Town 'n' Country driveway?

No. Loose or low pavers are reset first, since sealing over a dip locks the dip in. Show the contractor any low spots on the first visit so they appear in the quote.

Ready for a Free Estimate in Town 'n' Country?

Call (656) 254-3514 and tell us about your pavers.

Call (656) 254-3514

Free, no obligation